## Material

# Titanium

The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.

## Manufacturing processes

SLM / DMLSLMM

## About

Titanium (TiAl6V4) is an exceptionally strong, lightweight, and corrosion-resistant material that has very low toxicity. It is printed by sintering titanium powder together with a laser to produce metal parts that are equally as good as machined models.

## Technical Details

Accuracy ±0.2% (lower limit of ±0.2 mm)  
Density 4.4 g/cm³  
Min. wall thickness 1 mm

## Technical Properties

Tensile strength 900 - 1370 MPa  
Tensile modulus 105000 - 115000 MPa  
Tensile elongation 4 - 12%  
Flexural strength 1800 - 2200 MPa  
Flexural modulus 70000 - 90000 MPa  
HDT (0.45 MPa) 350°C  
HDT (1.8 MPa) 300°C  
Default layer height 0.025 mm  
Default infill 100%  
Embossing min. 0.4 mm  
Engraving min. 0.4 mm  
Warping risk Yes, for parts over 140mm or parts with thin long structures  
Maximum printing dimensions 600 × 600 × 600 mm

## Finishes

- Glass Blasted  
- Standard  
- Deburred  
- Polished

## Properties

- Strong  
- Heat resistant  
- Chemical resistant  
- Corrosion resistant  
- Water resistant  
- Functional

## Colors

Light Gray