Material

Titanium

The strongest 3D printable material, titanium offers good dimensional accuracy and fine details.

Manufacturing processes

SLM / DMLSLMM

About

Titanium (TiAl6V4) is an exceptionally strong, lightweight, and corrosion-resistant material that has very low toxicity. It is printed by sintering titanium powder together with a laser to produce metal parts that are equally as good as machined models.

Technical Details

Accuracy ±0.2% (lower limit of ±0.2 mm)
Density 4.4 g/cm³
Min. wall thickness 1 mm

Technical Properties

Tensile strength 900 - 1370 MPa
Tensile modulus 105000 - 115000 MPa
Tensile elongation 4 - 12%
Flexural strength 1800 - 2200 MPa
Flexural modulus 70000 - 90000 MPa
HDT (0.45 MPa) 350°C
HDT (1.8 MPa) 300°C
Default layer height 0.025 mm
Default infill 100%
Embossing min. 0.4 mm
Engraving min. 0.4 mm
Warping risk Yes, for parts over 140mm or parts with thin long structures
Maximum printing dimensions 600 × 600 × 600 mm

Finishes

• Glass Blasted
• Standard
• Deburred
• Polished

Properties

• Strong
• Heat resistant
• Chemical resistant
• Corrosion resistant
• Water resistant
• Functional

Colors

Light Gray