Polycarbonate - Material Guide | Craftcloud®
Material
Polycarbonate
Polycarbonate (PC) is an engineering-grade plastic with the highest heat resistance and impact strength of common FDM materials, and it is ideal for demanding functional parts and prototypes.
Manufacturing processes
FDM
About
Polycarbonate (PC) is an engineering-grade thermoplastic that outperforms standard FDM materials on both heat resistance and impact strength. It holds its shape up to around 150 °C, well above ABS's roughly 105 °C, PETG's roughly 80 °C, and PLA's roughly 60 °C, while also resisting impact and fracture better than ABS.
It's naturally transparent and resists many oils, acids, and alkalis.
Without UV stabilization, PC can gradually yellow under prolonged direct sunlight, similar to ABS, so for long-term outdoor use, ASA remains the better fit. It's also not ideal for parts under continuous repeated flexing, where fatigue can lead to stress cracking over time.
PC suits functional prototypes, jigs and fixtures, protective covers, and parts that need to withstand both heat and impact.
Technical Details
Accuracy ± 0.3% (lower limit of ±0.3 mm)
Density 1.2 g/cm³
Min. wall thickness 1 mm
Technical Properties
Download datasheet
Tensile strength 57 - 64 MPa
Tensile modulus 1700 - 2480 MPa
Tensile elongation 4 - 10.8%
Flexural strength 84.3 - 95 MPa
Flexural modulus 1685 - 2300 MPa
HDT (0.45 MPa) 110 - 113°C
Default layer height 0.2 mm
Default infill 20%
Embossing min. 0.8 mm
Engraving min. 0.8 mm
Interlocking parts Yes
Warping risk Yes, for parts over 140mm or parts with thin long structures
Maximum printing dimensions 1,000 × 1,000 × 1,000 mm
Finishes
- Standard
- Sanded
Properties
- Impact resistant
- Functional
- Heat resistant
- Water resistant
- Transparent
Colors
Black
White
Surprise Me!
Gray
Natural
Translucent
Blue
Green
Red
Yellow
Orange
Light Gray