PCTG - Material Guide | Craftcloud®

Material

PCTG

PCTG is a tougher, clearer alternative to PETG. It offers notably better impact resistance and moisture resistance while it retains PETG's ease of use and chemical resistance.

Manufacturing processes

FDM

About

PCTG (Poly Cyclohexylenedimethylene Terephthalate Glycol) belongs to the same copolyester family as PETG, but it uses a higher concentration of the same glycol modifier, which gives it meaningfully better impact resistance. This is why parts are less likely to shatter under sudden stress compared to standard PETG.

The raw tensile and flexural strength are similar to PETG; the real improvement is in toughness, not baseline strength. PCTG also absorbs less moisture, which helps it retain its clarity and mechanical properties for longer in humid conditions, and it offers good chemical resistance along with excellent optical clarity.

Like PETG, it isn't optimized for long-term outdoor UV exposure – ASA remains the better option in that case scenario.

PCTG suits protective enclosures, snap-fit parts, clear housings, and functional components that need to withstand repeated impact.

Technical Details

Accuracy ±0.3% (lower limit of ±0.2 mm)
Density 1.23 g/cm³
Min. wall thickness 1 mm

Technical Properties

Tensile strength 45 - 65 MPa
Tensile modulus 1800 - 2300 MPa
Tensile elongation 3 - 5%
Flexural strength 65 - 75 MPa
Flexural modulus 2000 - 2500 MPa
HDT (0.45 MPa) 65 - 80°C
HDT (1.8 MPa) 55 - 70°C
Default layer height 0.2 mm
Default infill 20%
Embossing min. 0.3 mm
Engraving min. 0.3 mm
Interlocking parts Yes
Warping risk Low
Maximum printing dimensions 601 × 601 × 601 mm

Finishes

Properties

Colors

White
Black
Surprise Me!
Translucent
Gray
Red
Green
Yellow
Anthracite
Silver
Blue
Light Gray
Dark Gray
Dark Green
Dark Blue
Orange
Translucent Navy Blue
Translucent Green
Translucent Blue
Translucent Red
Light Green
Light Blue
Translucent Orange
Neon Yellow
Lime Green
Translucent Yellow
Neon Orange
+5