Multicolor PLA - Material Guide | Craftcloud®
Material
Multicolor PLA
Multicolor FDM prints made with two or more PLA filaments offer vibrant, visually striking results. Ideal for decorative or functional parts, these prints combine strong layer adhesion, smooth surfaces, and precise color transitions.
Manufacturing processes
FDM
About
Multicolor FDM prints produced with two or more PLA filaments create visually dynamic parts that combine color variety with the strength and reliability of standard PLA.
By using multi-extrusion or filament-switching techniques, these prints achieve smooth transitions or sharply defined color boundaries, depending on the design. The result is a part that maintains PLA's excellent dimensional accuracy, stiffness, and ease of printing, while adding enhanced aesthetic appeal.
This method is well-suited for decorative models, brand prototypes, and educational or artistic applications that benefit from vivid, layered color effects. Multicolor PLA parts retain the same eco-friendly, low-warping properties as single-color prints, making them both durable and visually distinctive.
Technical Details
- Accuracy: ±0.3% (lower limit of ±0.2 mm)
- Density: 1.24 g/cm³
- Min. wall thickness: 1 mm
Technical Properties
- Tensile strength: 26.8 - 70 MPa
- Tensile modulus: 1817 - 3973 MPa
- Tensile elongation: 1.9 - 20%
- Flexural strength: 46.2 - 88 MPa
- Flexural modulus: 2461 - 3800 MPa
- HDT (0.45 MPa): 50 - 55°C
- Default layer height: 0.2 mm
- Default infill: 20%
- Embossing: min. 0.4 mm
- Engraving: min. 0.4 mm
- Interlocking parts: Yes
- Warping risk: Low
- Maximum printing dimensions: 360 × 360 × 360 mm
Finishes
- Standard
Properties
- Visual
Colors
Multicolor